Skip to main content

AntonBauer Helpcenter

Safety

Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these instructions. Do not operate the product if you do not understand how to use it safely. Save these instructions for future reference.

Warning Symbols Used in these Instructions

Warning

Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘Caution’.

Danger

Where  there  is  a  risk of electric shock, comments appear supported by the hazardous voltage warning triangle.

Intended Use

The Anton/Bauer Titon Base Lithium-ion battery is specifically designed and optimized to be charged with current Anton/Bauer chargers. The Titon battery Series are compatible with Anton/Bauer chargers and have been tested on industry recognized competitive chargers as well. For optimal performance and enhanced battery longevity, we recommend using Anton/Bauer chargers.

Electrical Connection

Danger

Risk of electric shock. Do not remove cover, no user serviceable parts inside the product.

Warning

Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.

Caution

Do not exceed the current output limit of the product when powering auxiliary devices.

Danger

Refer servicing to qualified service personnel.

Operation

Warning

Special precautions and handling instructions are contained in this user guide and should be strictly adhered to for safe and reliable operation.

Warning

Never use flammable or combustible materials and solvents around batteries or chargers.

Caution

The product should not be used outside the operating temperature limits. Refer to the product technical specifications for the operating limits for the product.

Warning

While we offer the protection against water ingress, we still generally advise against doing so as part of good practice. We don't formally have an IP rating, so this is a bit of a catch all.

Warning

When cleaning the product, use a soft damp cloth only. Do not wet the exposed metal parts of the battery. Do not use solvents, detergents or scouring agents.

Caution

All Nickel-Metal Hydride (NiMH) batteries have a finite life. If the battery exhibits noticeably shortened run-time the battery should be replaced immediately. Shortened run-time is indicative of at least one cell, which has reached end of life. Under no Circumstances attempt to “recondition” this battery by repeated charging and discharging.

Danger

Do not drop, puncture or crush this battery. Do not use the battery if the case is damaged or broken. Do not open or attempt to service this battery if damaged.

Warning

These electronic devices can be damaged if the battery is subject to abuse or damage. Do not use a battery that has been subjected to excessive mechanical shock or water damage.

Charging

Danger

The VCLX NM2 Battery can only be charged with the VCLX NM2 charger. Do not attempt to charge on non-InterActive chargers or chargers not manufactured by Anton/Bauer.

Maintenance

Danger

The fitting of  non-approved parts or accessories, or the carrying out of non-approved alterations or servicing can be dangerous and could affect the safety of the product. It may also invalidate the terms and conditions of the product warranty.

Danger

Never attempt to service this battery. Refer servicing to qualified service personnel.

Danger

Never attempt to open this battery. The electronic circuits inside the battery can be damaged causing malfunction and/or potential hazard to person and property.

Periodic cleaning of both the charger terminals and battery terminals will ensure continued reliable operation. Clean the terminals occasionally with a pencil eraser or lightly scrape the surface with a blunt instrument to help reduce the likely hood of build up causing poor communication or charging.

Contact Anton/Bauer Customer Support Group with additional inquires as to maintenance.

Storage

Caution

Sustained elevated temperatures are the primary reason for premature failure of Nickel-metal hydride batteries.

Caution

Charge batteries at room temperature. In warm climates keep chargers in air conditioned rooms for best performance.

Caution

Although Nickel-metal hydride has good self discharge characteristics, batteries should be stored for long term storage in a fully charged condition.

Caution

Batteries should be stored in a fully charged state with the button in the OFF position to minimize the self-discharge. The battery will "wake up" with the push of the button if it hasn't self-discharged entirely, otherwise will "wake up" when placed on a charger.