Safety
Warning Symbols Used in these Instructions
Safety cautions are included in these instructions. These safety instructions must be followed to avoid possible personal injury and avoid possible damage to the product.
WARNING! Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘Caution’.
ELECTRIC SHOCK Where there is a risk of electric shock, comments appear supported by the hazardous voltage warning triangle.
Intended Use
The Anton/Bauer® Performance Series Chargers deliver all of the proven reliability of previous Anton Bauer chargers in a portable power system addressing both Gold Mount®, Gold Mount Plus and V-Mount configurations. The technology advancements of this charger deliver the features and performance of several essential power products in one economic and portable package while reducing power consumption.
Electrical Connection
WARNING! Risk of electric shock. Do not remove cover, no user servicable parts inside the product.
WARNING! Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.
WARNING! It is the responsibility of the local organisation to ensure that the product is periodically checked for electrical safety in accordance with local regulations.
CAUTION! This product must be connected to a power supply of the same voltage (V) and current (A) as indicated on the product. Refer to the technical specifications for the product.
CAUTION! AC Mains plug or appliance coupler is to be used as a power disconnect device; make sure it is readily accessible.
CAUTION! All data connections to other devices must be made using shielded cables.
CAUTION! Using alternative power sources will invalidate the system EMC liability.
CAUTION! Do not exceed the current output limit of the product when powering auxiliary devices.
CAUTION! When powering the charger using a generator, the generator must produce a sine wave or modified sine wave output, otherwise, the charger may be damaged.
WARNING! RISK OF ELECTRICAL SHOCK: Refer servicing to qualified service personnel.
Basic Electrical Insulation (Class 1 Equipment)
WARNING! This product is Class 1 equipment. For safe operation this equipment must be connected to a power supply that has a protective earth connection (US: ground).
Operation
WARNING! Special precautions and handling instructions are contained in this user guide and should be strictly adhered to for safe and reliable operation.
WARNING! Never use flammable or combustible materials and solvents around batteries or chargers.
CAUTION! The product should not be used outside the operating temperature limits. Refer to the product technical specifications for the operating limits for the product.
CAUTION! Slots and openings are intended for ventilation purposes to ensure reliable operation of the product and protect it from overheating. Do not block or cover any slots and openings.
WARNING! Protect the product from water, moisture and dust. The presence of electricity near water can be dangerous.
WARNING! Charger must not to be exposed to dripping or splashing and not to be used near objects filled with liquids.
WARNING! When cleaning the product, use a soft damp cloth only. Do not wet the exposed metal parts of the charging unit. Do not use solvents, detergents or scouring agents.
Maintenance
WARNING! The fitting of non-approved parts or accessories, or the carrying out of non-approved alterations or servicing can be dangerous and could affect the safety of the product. It may also invalidate the terms and conditions of the product warranty.
RISK OF ELECTRICAL SHOCK: Refer servicing to qualified service personnel.