Safety
Important information on the safe installation and operation of this product. Read this information before operating the product. For your personal safety, read these instructions. Do not operate the product if you do not understand how to use it safely. Save these instructions for future reference.
Warning Symbols Used in these Instructions
Safety cautions are included in these instructions. These safety instructions must be followed to avoid possible personal injury and avoid possible damage to the product.
Warning
WARNING! Where there is a risk of personal injury or injury to others, comments appear supported by the warning triangle symbol. Where there is a risk of damage to the product, associated equipment, process or surroundings, comments appear supported by the word ‘Caution’
Warning
ELECTRIC SHOCK Where there is a risk of electric shock, comments appear supported by the hazardous voltage warning triangle.
Intended Use
The Anton/Bauer® Performance Series Chargers deliver all of the proven reliability of previous Anton/Bauer chargers in a portable power system addressing both Gold Mount® and V-mount configurations. The technology advancements of this charger deliver the features and performance of several essential power products in one economic and portable package while reducing power consumption.
Electrical Connection
Warning
WARNING! Risk of electric shock. Do not remove cover, no user serviceable parts inside the product.
Warning
WARNING! Risk of electric shock. Always check cables for signs of damage. Damaged cables can cause personal injury and/or damage the equipment.
Warning
WARNING! It is the responsibility of the local organisation to ensure that the product is periodically checked for electrical safety in accordance with local regulations.
Caution
CAUTION! This product must be connected to a power supply of the same voltage (V) and current (A) as indicated on the product. Refer to the technical specifications for the product.
Caution
CAUTION! AC Mains plug or appliance coupler is to be used as a power disconnect device; make sure it is readily accessible.
Caution
CAUTION! All data connections to other devices must be made using shielded cables.
Caution
CAUTION! Using alternative power sources will invalidate the system EMC liability.
Caution
CAUTION! Do not exceed the current output limit of the product when powering auxiliary devices.
Warning
WARNING! RISK OF ELECTRICAL SHOCK: Refer servicing to qualified service personnel.
Operation
Warning
WARNING! Special precautions and handling instructions are contained in this user guide and should be strictly adhered to for safe and reliable operation.
Warning
WARNING! Never use flammable or combustible materials and solvents around batteries or chargers.
Caution
CAUTION! The product should not be used outside the operating temperature limits. Refer to the product technical specifications for the operating limits for the product.
Caution
CAUTION! Slots and openings are intended for ventilation purposes to ensure reliable operation of the product and protect it from overheating. Do not block or cover any slots and openings.
Warning
WARNING! Protect the product from water, moisture and dust. The presence of electricity near water can be dangerous.
Warning
WARNING! Charger must not to be exposed to dripping or splashing and not to be used near objects filled with liquids.
Warning
WARNING! When cleaning the product, use a soft damp cloth only. Do not wet the exposed metal parts of the charging unit. Do not use solvents, detergents or scouring agents.
Maintenance
Warning
WARNING! The fitting of non-approved parts or accessories, or the carrying out of non-approved alterations or servicing can be dangerous and could affect the safety of the product. It may also invalidate the terms and conditions of the product warranty.
Warning
RISK OF ELECTRICAL SHOCK: Refer servicing to qualified service personnel.
Weekly, or as needed - Clean the device, associated components, and accessories as needed with a damp, non-saturated cloth or paper towel. Do not wet the exposed metal part of the battery charge terminals. Do not use solvents or scouring agents. Examples of approved solvents are Cidex® and Windex®. Consult Anton/Bauer Customer Support Group for approved list of cleaning agents.
Periodic cleaning of both the charger terminals and battery terminals will ensure continued reliable operation. Clean the terminals occasionally with a pencil eraser or lightly scrape the surface with a blunt instrument to help reduce the likely hood of build up causing poor communication or charging.
Contact Contact videndumsupport.com with additional inquires as to maintenance.