Skip to main content

Centro de ayuda AntonBauer

[en] User Guide

  1. [en] Enter WiFi name and password.

    Wifi_name_and_password.svg

  2. [en] Optional - Enter location.

    Optional_enter_location.svg

  3. [en] The program will now create the configuration file which will need to be download on to a USB. This USB is then used to connect and link the QUAD 6A (26V, LP4) charger, VCLX NM2 / LI and Salt-E Dog to your account & WiFi systems.

    Device_Inventory.svg

  4. [en] The charger has been added and will now appear in the 'Charger' section

    1st_charger_added.svg

  5. [en] Clicking on the charger opens a new screen displaying the following: Model Serial Number Current Firmware.

    Device_information.svg

    1. [en] Scroll down the page to find 'Battery Analytics' and 'Notes'.

    2. [en] The battery analytics will download whilst the battery is connected to the charger. Depending on the age of the battery this can take longer, a new battery will down its analytics within the space of a couple of minutes as there is little history to share.

    3. [en] The battery processes records in reverse order, starting from the earliest record and moving toward the most recent. Its position is saved, so if the battery is placed on the charger for 2 hours and then removed, it will resume operation from where it left off.

    4. [en] In the ‘Notes’ section, you can add a note (for example, an in-house serial number). This will then appear as a filter option in the ‘Batteries’ inventory overview.

  6. [en] To register batteries, connect them to the charger. The charger will display the battery model information and prompt for registration to the account. Select ‘Register’ to proceed.

  7. [en] The battery will now be registered to the account and in the new screen, you will see: Model, Serial Number, Mounting Method, Current Firmware, Temperature and cycle count. If a battery is cross rented and placed on a Fleet Enabled Charger it will advise them it is an external battery and they will only see the model and charge percentage. All battery data is protected and only viewable by the account holder.

    Battery_details.svg

  8. [en] To unregister a battery, or any device, click on the ‘Unregister Device’ tab. That battery can now be registered by another user and the data seen by them also, if they have Fleet enabled charger and account set up.

En esta sección: